Ghosts

Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1667 Over N Over Stencils- HALLOWEEN
• 21-1693 Over N Over Stencils-BONES ALPHA
• 29-2523 Angel Glass Shape (2)

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design used the hover and press method to place stencil images in spots where the necessary view is obscured by stencil borders. The technique is done by placing stencils sticky side up, holding the glass over the stencil and maneuvering it in air before pressing it down onto the stencil.
2. After preparing the glass. Use the hover and press method to position the tree into the left side of one ghost. Add the graveyard and bats directly to the front of the ghost.
3. After preparing the glass, use the hover and press method to position the spooky eyes as high on the ghost head as possible. Place the dripping blood stencil upside down with the open space hanging off the shape.
4. Beginning in the middle of the ghost, place the first O in BOO. Position the B and second O on either side, slightly higher than the first O. * To etch the BOO all at once either use the Q and cover the extra bone or use 2 Bones Alpha sheets. Otherwise, add the second O later.
5. Follow the etching cream directions to etch the designs onto the ghosts.