Pulse Heart Wine Glass

Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1702 Over N Over Stencil- LOVE
• Wine Glass

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages. The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously. Additionally, it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. After preparing the glass, position the pulse heart and the V next to each other near the brim of the glass. Place the stencils on an angle. Add the L and E on either side of the heart and V to complete the word.
3. Follow the etching cream instructions to etch the pulse love onto the glass.
4. Dry off and place the pulse heart on an angle on the base of the glass. Use the etching cream, as before, to etch the second heart onto the glass.