Dragonfly Starshine Bottles

Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1715 Over N Over Stencils- DRAGONFLY
• 2 Clear Glass Bottles
• 2 Cork Lights

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design was etched in stages. The technique allows the use of a particular stencil image multiple times on the same project when you don't have enough to etch all simultaneously. Additionally, it enables stencil images to be placed in closer proximity than the stencil borders would otherwise permit.
2. After preparing the glass, position dragonflies from the top to the bottom.
3. Follow the etching cream instructions to etch the dragonflies onto the bottle.
4. Continue adding and etching dragonflies to the bottles until the desired look is achieved.
5. Unpack the cork lights and follow the directions to thread the lights into the bottles. Fit the cork into the top of the bottles and turn on.