Poker Card Vase

Materials

• 15-0200 Armour Etch Glass Etching Cream
• 21-1604 Over N Over Stencil-FACE ELEMENTS
• 21-1641 Over N Over Stencil-POKER PARTY
• Rounded Cube Vase
• Blue Foam Sheet
• Dazzle Tac Glue

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. Wash vase with hot, soapy dish detergent, rinse & dry well. Next clean area where stencils will go with glass cleaner just before applying them.
2. Apply the card hand stencil close to the bottom of the vase.
3. Cut 2 small diamonds from masking tape (optional) and apply vertically down the center of the first card (you can also use the diamond from the stencil sheet).
4. Apply the man eyes with the heavy eyebrows just over the top of the cards, overlapping stencil edges.
5. Cover exposed areas on the face of the vase with masking tape, overlapping all edges of tape and stencils.
6. Apply Armour Etch Glass Etching Cream to the stencils.
7. Holding the vase upside down, rinse off all the etch cream, be careful not to let the etch cream and water run inside the vase. Remove tape and stencils and rinse again.
8. Clean with glass cleaner and dry completely.
9. Make a template from paper of a hand, about 1 square. Trace to foam sheet and cut with scissors or craft knife.
10. Glue to bottom of vase over bottom of the cards (see picture).