Get Personal - Grape & Vine

Materials

• #15-0200 Armour Etch Glass Etching Cream
• #21-1645 Over N Over Stencil-REVERSE MR.&MRS.
• #21-1652 Over N Over Stencil-WINE TIME
• #29-2605 Thin Bevel Bell

Additional Materials

• Soft Paper Towels
• #15-0315 Glass Cleaner
• #08-9606 Brushes
• #08-9999 Gloves
• #08-9415 Masking Tape

Directions

Preparation and Usage Starting Skills

• Over N Over Stencil Usage Instructions
• Armour Etch Usage Instructions

Project Steps

1. This design used the hover and press method to place stencil images in spots where the necessary view is obscured by stencil borders.The technique is done by placing stencils sticky side up, holding the glass over the stencil and maneuvering it in air before pressing it down onto the stencil.
2. After preparing the glass, turn the glass over and use the hover and press method to center the grape and vine stencil onto the bell. Turn back over and place the desired letters into the empty ribbon beginning with the letters in the middle and working outward. See the lettering tutorial if necessary. Press all down firmly.
3. Follow the etching cream instructions to etch the design onto the bell.